How to Remove an AR Front Sight

How to Remove an AR Front Sight

Sometimes an armorer may find it necessary to remove the front sight housing on an AR-15/M16 type rifle. Standard front sights are pinned to the barrel. Manufacturers such as Rock River and DPMS use straight pins, while others like Colt and Bushmaster employ tapered pins.

Moving these pins requires a strike from a hammer and punch, and the front sight must be solidly supported to prevent it from walking around on the bench. If the sight is allowed to move, you may end up with unprofessional looking dings in the steel around the pins where the punch slipped.

Brownells produces a special polyethylene bench block designed to aid both removal and installation. The block is machined to accommodate most front sights, although I have seen a couple that were too big to fit the recess.

Taper pins must be driven out from the small end (left to right). The ends of the pins are rounded and a standard punch will tend to slip each time it is struck. Use a Brownells Taper Pin Starter Punch if possible.


The end of this tool has a concave face designed to fit the ends of the pins. This is only a starter punch. Once the pin begins to move, a standard 1/8-inch punch may be used to drive it out. Before reinstalling the front sight, a size 2/0 taper pin reamer may be used to clean up the holes if they are burred.


Another pin removal tool comes to us from X-Ring Products. This tool consists of a clamp that fits over the front sight and provides a guide that keeps the punch from wandering. Machined from 6061 aluminum and hard anodized, this kit comes complete with a short starter punch and a standard length punch. I have found this device effective for punching out tight taper pins.


Front Sight Block

Norcross\' well-used Brownells front sight block has seen many a pin driven out and replaced. This part is essential if you plan to work on many ARs.

Front Sight Positioned

A front sight positioned for removal on the Brownells block. Combining the block with a taper pin starter punch will keep you from marring the sight.

X-Ring Precision Tool

The X-Ring Precision sight pin removal tool comes packed in a small Pelican case with punch and Allen wrench. It\'s great for the tightest pins.

Rear Guide Hole

Here the rear guide hole of the X-Ring fixture is positioned for removal of the rear pin. With the tool clamped in place, the punch can\'t wander off course.

Tightening the X-Ring

The X-Ring fixture is tightened in place with a socket head cap screw. The thumbscrew adjusts a plastic bumper that bears against the sight so the fixture won\'t rotate.

Recommended for You

Want the “Holy Grail” of AR-15 rifles? Brownells has made that possible with their BRN-Proto retro rifle. Rifles

Brownells BRN-Proto Retro Rifle

Patrick Sweeney - July 02, 2019

Want the “Holy Grail” of AR-15 rifles? Brownells has made that possible with their BRN-Proto...

No one can restore receptivity to another Trump term with these disaffected gun owners but the president himself. 2nd Amendment

2020 is Trump's to Blow with Gun Owners

David Codrea - July 09, 2019

No one can restore receptivity to another Trump term with these disaffected gun owners but the...

We at Firearms News hope that you have a safe and happy Independence Day! 2nd Amendment

It's Independence Day NOT Just the Fourth of July!

FAN Online Editors

We at Firearms News hope that you have a safe and happy Independence Day!

See More Recommendations

Popular Videos

Ruger introduces Rifles Chambered in the All-New .350 Legend

Ruger introduces Rifles Chambered in the All-New .350 Legend

Two Ruger American Ranch rifles and the AR-556 MPR are now chambered for Winchester's .350 Legend cartridge.

Performance Center M&P Shield M2.0

Performance Center M&P Shield M2.0

From Smith & Wesson, the M&P Shield M2.0 is a great option for a carry gun with optics option.

M134 Mini-Gun

M134 Mini-Gun

While filming the 2018 season of Guns&AmmoTV we had the unique opportunity to fire the M134 Minigun.

See more Popular Videos

Trending Stories

Want the “Holy Grail” of AR-15 rifles? Brownells has made that possible with their BRN-Proto retro rifle. Rifles

Brownells BRN-Proto Retro Rifle

Patrick Sweeney - July 02, 2019

Want the “Holy Grail” of AR-15 rifles? Brownells has made that possible with their BRN-Proto...

A $50 Ring Loc-Kit gives AirForce Condor airgunners unparalleled power and accuracy. Air Guns

AirForce Airguns Condor Ring-Loc Kit Review

Tom Gaylord - May 29, 2019

A $50 Ring Loc-Kit gives AirForce Condor airgunners unparalleled power and accuracy.

The last of Germany's infamous Elefant tank destroyers. Historical

World War II German Elefant Tank Destroyers

Neal S Shera - July 12, 2019

The last of Germany's infamous Elefant tank destroyers.

See More Stories

More How-To


Mosin-Nagant and SKS rifles are leaders in the field of entry-level bang-sticks and can be found at good prices How-To

How to Buy and Clean a Mosin-Nagant Rifle

Jeff Knox - June 17, 2016

Mosin-Nagant and SKS rifles are leaders in the field of entry-level bang-sticks and can be...



Without a doubt, it was a bit awkward and the side-mounted magazine didn't help its balance any. How-To

Shooting the MP-28 Submachine Gun

David Fortier - June 09, 2016

Without a doubt, it was a bit awkward and the side-mounted magazine didn't help its balance...

Bowling Pin Shooting began as a demonstration technique and quickly evolved into an annual shooting match. How-To

The Sport of Bowling Pin Shooting

Patrick Sweeney - March 20, 2019

Bowling Pin Shooting began as a demonstration technique and quickly evolved into an annual...

See More How-To

GET THE MAGAZINE Subscribe & Save

Temporary Price Reduction.

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW OUR CURRENT ISSUE

GET THE NEWSLETTER Join the List and Never Miss a Thing.